Cox Steam Heat Exchangers
Cox Steam Heat Exchangers take waste steam to heat cold water efficiently, economically and with no damaging effects on the environment - with the added benefit of a constant source of cheap hot water.
Cox water heater bodies are made from high quality corrosion resistant materials. The closed circuit means that when installed and used in accordance with the technical instructions, the discharged hot water from the outlet cannot constitute a hazard.
Many users are less tolerant of the alternative practice of producing hot water by the simple means of injecting steam into water. The knocking, vibration and dangerous escape of steam along with associated hot water storage problems are unacceptable in many installations and these undesired properties are eliminated.
This is achieved by a system of nozzles and a carefully arranged water supply mixing with the steam in the heat exchange chamber. The chamber incorporates a large available condensation surface as a consequence of the metal "Racshig" rings that fill it. The heaters are capable of working satisfactorily with varying steam and water pressures within the design specification of the unit.
Cox Steam Heat Exchangers can be used in the following applications:
-
Cleaning work
-
Boiler feed water heating
-
Economiser feed water pre-heat
-
Temperature boosting of water in the coil heated storage tanks
-
Temperature maintenance of circulating water in various applications.
Specifications:
STEAM INLET TEMPERATURE |
in the range 108 to 180° C saturated steam |
STEAM INLET PRESSURE |
in the range 0.34 to 9.0 bar gauge |
WATER INLET PRESSURE |
0.34 to 9.0 bar gauge |
WATER OUTLET TEMPERATURE |
up to 93°C depending on steam conditions |
WATER CAPACITY |
20 to 150 litre/min |
Other Facilities: Engineering Casting • White Metal • Architechtural • Alucon Die Casting • Precision Machining
